Product Center

7*24H Online

We will respond to your inquiry within 24 hours after receiving your inquiry.

high temperature resistant sae j30r9 fuel injection hose

SAE30R6 KX Fuel Line - Pelican Parts Forums

Other areas of utility are those appliions requiring fuel permeation resistance exceeding 30R8 and ones which require fuel resistance greater than that obtainable with 30R6, 7, and 8. Exposure of this hose to gasoline or diesel fuel that contains high levels, greater than 5% by volume, of oxygenates, i.e., ethanol, methanol, or MTBE may

Fuel Hose | SAE J30 R6 Nitril Rubber hose

SAE J30 R6 approved Nitril Rubber fuel hose sold by the meter length. this fuel hose is fully compliant with SVA regulation and most types of fuel. Our Push-On swivel hose end fittings can be used with this hose. this type of hose is Nitrile rubber all the way through, and has a single ply of fabric reinforcement. -Suitable for unleaded fuels

Sae J30 R10 Rubber Hose For Mineral Hydraulic Oil

Sae J30 R10 Rubber Hose For Mineral Hydraulic Oil Coupling recommendations megacrimp couplings cover black synthetic rubber oil and abrasion resistant modified nitriletype c2 recommended for lowpressure hydraulic oil return lines for general purpose water glycol antifreeze solutions conveying diesel fuel gasoline or air meets sae 30r2 performance …

Fuel Line Tubing : Fuel System / Carbs by LotusElan.net

Sep 04, 2011· In looking to replace these fuel lines we are advised to use pipe to J30R9 standard. Here is some additional info I found: Hoses in the USA are marked with an SAE code, eg. SAE J30R9, according to its ability to resist modern fuels. Since much of the hose bought in the UK is made (or sold) in the USA then these markings may appear here.

CARB/SORE; EPA; SAE J30R7/30R14T2 Series 389 - Comoso

It also meets or exceeds SAE J30R7 and SAE J30R14T2 specifiions, and is compatible with Parker SAE J2044 and J2045 Push-to-Connect fittings. NOTES: • Refer to the table on pages 213-214 for fuel compatibility and service conditions. • Do not use in marine fuel appliions. Refer to Series 7165 on page 308.

Fuel Hose Types and Specifiions - Import Car

Feb 01, 2021· SAE 30R9 hoses are designed for high-pressure appliions like fuel injection systems. Often SAE J30R9 is also CARB approved meaning it is EPA certified to a low permeation standard. This means the hose is designed to contain fuel evaporation through the cover. SAE 30R10 includes hoses that are submerged in fuel. This type of hose is used

WIRE & CABLE

It was developed for high temperature resistance to oils, coolants, ozone, and cooling system additives. FUEL INJECTION HOSE Ozone & coolants. -30 F to + 300 F. Meets SAE J30R9. Compatible with gasoline, E85 flex-fuel, ethanol extended gasoline, diesel, bio-diesel & lubriion oils. FUEL LINE HOSE

Correct Fuel Hose Installation - UnderhoodService

Feb 25, 2016· SAE 30R9 hoses are designed for high-pressure appliions like fuel injection and oil. These are designed to stand up to the environment under the hood. SAE 30R10 includes hoses that are submerged in fuel. This type of hose is used inside the fuel tank and typically on the fuel pump module.

Automotive History: 1975-1979 Cadillac Electronic Fuel

Jul 30, 2021· Ford and Buick had sequential port fuel injection on most 5.0L V8 and 3.8L V6 by 1986. Both systems were very reliable and effective. Chevrolet had port fuel injection on high output versions of the 5.0 and 5.7 by that time. I don’t know why GM didn’t have port fuel injection on the regular output 305, 307, and 350’s by 1986.

sae 100r1at standard material used for hose

SAE 100R4 Suction & Return Line Hose Dry Air/Hot Water Multipurpose Multipurpose High Temperature Air Brake Hose SAE J1402 A Compressed Natural Gas and Liquefied Petroleum Gas Marine Fuel and Engine Hose SAE J1402 Al SAE J1402 All SAE 100R5 SAE J1402 All SAE 100R5 SAE J1402 All SAE 100R5 Refrigerant Hose SAE J2064 TYPE C 1/2 SAE Minimum …

sae j30r7 r6 5 rubber flex hose

This kind of Hose normally don''''t have high pressure, for example the international working pressure requirements for SAE J30R7 Fuel Hose is only 7 bar, while our hose can reach as high as 20bar. PASSION® SAE J30R7 Fuel Hose enjoys excellent gasoline resistance, aging resistance, good tensile strength, Good Bending properties at low temperature.

Hot Rods - Ethanol compatible fuel line | The H.A.M.B.

Nov 16, 2021· The rubber hose rated for fuel injection is very high quality, and will work. But it''s also not as flexible, so consider that if your hose has a very sharp bend in it. I personally just buy rubber hose that''s alcohol resistant and never had any issues with the gasohol attacking it, …

Fuel Line / PCV / Emission Control Hose SAE 30R7

Temperature Range: -40°F to 257°F (-40°C to 125°C) SAE Specifiions: SAE J30R7 Product Specifiions: 580019 Branding: Continental ID WP Fuel/Emission SAE 30R7, Made in U.S.A. Installation: See selection of Continental connectors and clamps WARNING Do not use for pressure lines or fuel injected engines.

fittings | Richard''s Sling 2 Build Log

SAE J30R9 fuel injection hose was provided for the high pressure lines between the fuel pump an the engine. I’ve replaced all of the R7 hose with R9. The R9 hose has low permeability and resistance to methanol. There’s also R14 hose. It seems to be somewhat more available, but samples I’ve found are noticeably stiffer than R9 and I

1987 Porsche 911 Series Replacement Fuel Pressure

Kuehl brand fuel lines are SAE J30R9 hose, having a higher resistance to fuel and a lower permeation than other J30 specs $171.28 Fuel Injection® Remanufactured Warm-Up Regulator

Gates Safety Stripe II Fuel Hose 27003 - O''Reilly Auto Parts

Oil resistant cover resists the effects of high heat and ozone found in engine compartments. Meets SAE 30R6 and 30R7. Vacuum rating of 24 inch /Hg for sizes less than 1/2 inch I.D., and 10 inch /Hg for sizes 1/2 inch to 3/4 inch I.D. at aient temperatures. Temperature Rating: -40 Deg. F to 257 Deg. F (-40 Deg. C to 125 Deg. C) with gasoline

Oil cooler hose manufacturer - V-Twin Forum

Apr 04, 2017· for a 3/8th hose SAE J30R9 means that its gasoline resistant and has a working pressure of 100lbs with a standard burst pressure of 900lbs. It also rated to 24HG''s of vacuum and has a bend radius under 1 inch. ABG means that it suitable for use in air brake appliions exposed to gasoline. Which would be the big vacuum hose to the brake booster.

Heavy Duty Replacement Parts - Continental Engineparts

Hose › Molded Radiator Hose, Heater Hose and Molded Bypass Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator. › Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line. Fuel Injection Hose SAE 30R9

Substitutions – Page 3 – HMMWV Systems

Jan 05, 2019· We have ordered SAE J30R9 hose (fuel injection hose) in place of the AC Delco 32102. J30R9 hose is still quite not identical in specifiion to the RB1450-1-41DX1-20D hose, as it is is rated to a maximum operating pressure of 100 p.s.i. (compared to the 350 p.s.i. of the Eaton H10104), and a burst pressure of 900 p.s.i. Regardless, for

Industrial Rubber Hose | CMT Flexibles Ltd

SAE J30R9 FUEL INJECTION HOSE . Automobile and truck fuel injection hose for use with petrol, ethanol, diesel and bodiesel. FLEXAGRIP (MOULD COOLING HOSE) Hi-Miler Heater Hose is designed for use in high temperature appliions in automotive and truck cooling systems. Also TAN FLEXTRA. For tank truck and in-plant service. Used to

SURFACE STANDARD Revised 2008-12 Superseding J30 …

SAE J30R9 covers Fuel Injection, Medium Pressure Coupled and Uncoupled Synthetic Rubber Tube and Cover Hose. SAE J30R10 covers In-Tank, Low Pressure, and Uncoupled Fuel Hose. SAE J30R11 covers Low Permeation Fuel Fill and Vent Hose. SAE J30R12 covers Low Permeation Fuel Feed and Return Hose. SAE J30R13 covers Diesel or Biodiesel Fuel Feed …

Rubber Fuel Hose Ethanol Resistant E10 High Pressure

High pressure high temperature ethanol resistant fuel hose. Suitable for petrol (E10 rated), diesel, bio diesel and oil. 10 BAR working pressure. Working temperature -40 to + 150c.

sae j30r7 r6 rubber discharge hose

Get fuel injection hose Service, Good quality fuel injection . SAE J30R6 3 / 8 Fuel Hose 20 Bar ID 5MM To 51MM OD 11.5MM To 65MM Black Smooth Type 5 / 16'''''''' Fuel Hose 20 Bar For Gas Station 50M / 100M Length ID 1 / 2 Inch High Temperature Rubber Fuel …

Performance Fuel Hoses | E46 Fanatics Forum

Dec 21, 2011· Budget SAE J30R9 hose is good through 180 psi (the ultimate pressure rating depends on the type of clamp). This hose is suitable for use on both multipoint fuel injection systems and low-pressure carbureted systems that use hose clamps. The hose will be clearly stamped "J30R9" or the further improved "J30R12."

SAE J30 R9 Fuel Line Injection Nitrile Rubber Hose Pipe

SAE J30 R9 Fuel Line Injection Nitrile Rubber Hose Pipe – 6.3 x 12.7mm. This Fuel Hose has been designed for use with Modern Chemically Aggressive Bio-Ethanol Enriched Petrol Formulations (E5 & E10) As per currently served petrol pump petrol. SAE J30 R9 is the highest SAE Specified Grading available for petrol fuel lines.

Porsche 944 Braided Fuel Lines - Super Sport Cars

Nov 14, 2021· Spectre 29204 Fuel Line – Rubber with braided stainless steel cover Universal Sold individually. Our lines use the latest SAE J30R9 hose which has a higher resistance to standard petrol fuel biofuels and alcohol fuels such as E85. Griffiths fuel lines also have a lower permeation rate compared to original stock hose and older J30 specs.

Dayco Fuel Injection Hose 80093 | eBay

Manufacturer Part #: 80093. Note: This hose is suitable for diesel and bio-diesel fuels. Heater Hose. Filters - Fuel. Exceptions and Regulations. We do so by getting the products you need to your doorstep as quickly as possible at an affordable rate.

heat resistance sae 30r14t2 fuel hose

1993/12/1· Fuel and Oil Hoses. J30_199806. This SAE Standard covers fuel and oil hose, coupled and uncoupled, for use with gasoline, oil, diesel fuel, lubriion oil, or the vapor present in either the fuel system or in the crankcase of internal coustion engines in mobile, stationary, and marine appliions. Sections 7 and 11 cover hose intended to

Dayco Fuel injection hose ID: 10mm Length 7.6M -80090 | eBay

Part No: 80090. It is E85 fuel compatible. Note: Suitable for diesel and bio-diesel fuel.